Menu
Chip Breaker Spiral (UPCUT) -Particle Board / MDF Routing
Used for hogging at high feed speeds. Good removal of waste with upcut, however downcut provides a better hold down on material. The Chip Breaker also leaves a smoother finish than the Roughing spiral.
| Diameter | 6 mm – 25 mm |
|---|---|
| Shank | 6 mm – 25 mm |
| Length of Cut | 19 mm – 75 mm |
| Overall Length | 60 mm – 130 mm |
| Flutes | 2, 3 |
